Intumescent fire rated, flexible joint sealant. About 5 hour insulation and longer integrity rating depending on joint design.
Intumescent fire rated high performance flexible joint sealant.
One-part primer for Nitoseal MS60. The sealant must be applied between 30 minutes and 4 hours after the priming. Coverage: 0.5 litres Nitoseal MS1 Primer for a joint of 60 m.
Two-part primers for Nitoseal MS300 and Nitoseal MS600. The sealant must be applied between 30 minutes and 2 hours after the priming. Coverage: 0.75 litres Nitoseal MS2 Primer for a joint of 90 m.
One part, general purpose building sealant. Damp tolerant. Performs as an acoustic sealant.
One part non-staining façade sealant. Excellent UV and weather resistance. Primerless if joint movements do not exceed 40%.
One part, flexible, tough floor sealant. May be applied up to 20 mm wide for trafficked joints. Resistant to occasional chemical spillage.
Civil engineering and water industry sealant. Approved for use in contact with potable water. n Fast rate of cure and high resistance to ageing.
General purpose polyurethane building sealant. Adhesion to most common building materials.
Cold applied, pitch free, pavement sealant. Highly durable, oil & hydraulic fuel resistant sealant for roads, airports, ports andparkings.
Colpor 200PF primer for porous substrates. Low viscosity, penetrates well into the capillary cracks and pores of the surface. Coverage: 1 L for 25 L of Colpor 200PF.
Rubber/bitumen gun applied sealant. Excellent slump resistance. Suitable for joints up to 40 mm wide.
Polysulphide sealant suitable for airports. Available in machine grade (fast setting) and hand grade (standard setting).
Polysulphide sealant elastic rubber like seal. Ideal for heavily trafficked floor joints and sealing movement joints.
Thioflex 600 primer for porous substrates. The sealant must be applied between 30 minutes and 3 hours after the priming. Coverage: 1 L for 30 L of Thioflex 600.